Ref: DHCVP1300 Trau

The DHCVP series is the most complete range of dehumidifiers for swimming pools, it is designed for installation in a technical room and prepared for connection to air ducts. They stand out for their high resistance to corrosion and their wide degree of customization.

They have various options, from water batteries to heat the air in the pool, integrated plate recuperator that allows excess energy to be recovered to heat the glass of pool water, to a FreeCooling module with 3 dampers with heat recuperator from cross flows. The controller is digital, and allows the management of setpoints, operating parameters, alarms and Modbus gateway.

All models comprehended between DHCVP1100 and DHCVP3000 include:

Rapid mounting panel enclosure in galvanized steel with epoxy treatment.
Hermetic scroll type compressor mounted on shock absorbers.
Direct expansion evaporator in copper tube and vertical aluminum fins.
Condensate tray in stainless steel and filter at the entrance.
Condenser in copper tube and vertical aluminum fins.
Dual ear centrifugal fan with high static pressure.
Refrigeration circuit formed by dehydrator filter.
Thermostatic expansion valve and high and low pressure switch.
Control panel with fuses for compressor, fan and auxiliary circuits.
Compressor contactor.
Fan relay.
Connection block for remote switch and hygrostat.
Control microprocessor for stop/start of the compressor, defrost cycles and alarms.

Moreover, all products containing RC at the end, have a heat recovery system.

  • Extraction capacity (l/24h): 1285 L/24h
  • : Trau
  • Static air pressure in process (pa): 250 Pa
  • Sound level (db (a)): 70 dB (A)
  • Refrigerant: R410a
  • Electrical voltage (v/hz): 400 V/III/50 Hz
  • Dimensions. h x w x d (mm): 1250x850x1870 mm
  • Weight (kg): 710 Kg